Wilson Design Review (P6546)

The applicant requests Design Review approval to construct a new 1,000 square foot residence with an 660 square foot garage on a vacant lot in unincorporated San Anselmo. The applicant also requests Design Review approval for decks, an above ground pool and retaining walls that exceed 8 feet in height.

The proposed building area is 2,340 square feet and the proposed floor area is 1,800 square feet. The 1,800 square feet of proposed development would result in a floor area ratio of 1 percent on the 172,183 square foot lot. The proposed development would reach a maximum height of 28 feet 6 inches above surrounding grade and the exterior walls would have the following setbacks: 87 feet from the northern property line; 78.6 feet from the southern property line; and 100 feet from all other property lines. Various site improvements would also be entailed in the proposed development, including an Accessory Dwelling Unit, driveway improvements and a firetruck turnaround.

Design Review approval is required because the project proposes development on a vacant lot in a Planned Zoning District.

Zoning: RMP-0.2 (Residential Multiple Planned) 
Countywide Plan Designation: PR ( Planned Residential) 
Community Plan (if applicable): n/a